Meaning
Polyorganosiloxane elastomer systems crosslink through platinum-catalyzed reaction between vinyl-functionalized polymers and hydride-functionalized siloxanes without generating volatile byproducts. Formulations classified as addition cure silicone undergo no volumetric shrinkage during cure, preserving tight mechanical tolerances around delicate board components. The material maintains stable dielectric properties and mechanical flexibility across broad temperature ranges, making it suitable for potting power electronics modules and sealing RF enclosures.
High temperature or contact with sulfur compounds, amine catalysts, and organotin salts inhibits the catalyst, leaving the gel uncured at the board interface.
Cure Chemistry
Platinum complexes initiate the addition of silicon-hydride groups across vinyl double bonds at room temperature or elevated heat. When processing addition cure silicone in automated potting lines, temperature profile control dictates gel time and throughput speed without altering final crosslink structure. Inhibitors added by the chemical supplier temporarily block active platinum sites to extend pot life during dispensing operations.
Outgassing Prevention
Condensation elastomers release alcohol or acetic acid during vulcanization, whereas addition cure silicone forms a pure hydrocarbon backbone bridge. Optical modules and sealed sensor cavities require this clean reaction mechanism because condensate fogging degrades lenses and board contacts.
Inhibition Boundary
Contact with traces of sulfur from cured rubber gloves or tin from room-temperature vulcanizing sealants permanently poisons the noble metal catalyst. In board assembly lines, potting verification requires cleanroom handling and strict segregation from incompatibles to ensure full interfacial cure. Uncured liquid layers at component leads cause insulation breakdown and signal leakage under high humidity testing.