Meaning
Deviation of electromagnetic waves from a straight path as they pass through layers of varying air density. In radio frequency communication, atmospheric refraction affects the propagation of signals between ground-based antennas and satellites or remote nodes. The phenomenon occurs because the refractive index of air changes with temperature and pressure.
Signal Bending
Radio waves typically bend toward the earth in a standard atmosphere. Because atmospheric refraction extends the effective radio horizon beyond the geometric horizon, link calculations use a modified earth radius factor. This factor, often denoted as k, adjusts the curvature of the path to account for signal bending.
Precise adjustments prevent the signal from striking terrain obstacles that appear to be below the line of sight but are actually within the wave path. Correcting for this curvature is necessary to maintain a clear line of sight over long distances.
Path Clearance
Fresnel zone calculations must account for the variability of the refractive index. When atmospheric refraction becomes extreme, sub-refraction or ducting occurs. These conditions either lift the beam away from the receiver or trap it in a narrow layer, causing sudden signal loss or interference.
Design Margin
Antenna height and tilt settings are determined by the worst-case refractive conditions expected at a specific site. Connection stability depends on these verified parameters during the link planning phase. Variations in moisture content and temperature gradients dictate the required fading margin.