Meaning
Vertical range across specific layer pairs that a hole penetrates within a multilayer stack. Defining a drill span is necessary for blind and buried vias that do not pass through the entire board thickness. The coordinate data must specify both the start and stop layers for every drilling operation.
Accuracy in this specification prevents the tool from damaging internal traces on unrelated layers. It also dictates the sequence of lamination and drilling steps in the factory.
Via Configuration
Mechanical requirements of the circuit determine whether a hole is through-board or restricted. A standard through-hole has a drill span that covers the entire stack from top to bottom. Advanced high density designs utilize staggered or stacked vias with much shorter spans.
Aspect Ratio
Relationship between the hole diameter and the penetration depth influences the plating quality. A drill span that is too deep for a small diameter makes it difficult for chemicals to flow through the opening. Most fabricators cap the ratio at ten to one to ensure reliable copper deposition.
Layer Registration
Alignment of the internal pads with the drill bit is harder when the span covers many layers. Movement of the prepreg during lamination can cause pads to shift away from the intended path. Short spans between adjacent layers are less sensitive to these registration errors.