Meaning
Localized areas of severe signal degradation occur when radio frequency reflections arrive out of phase at a receiving antenna. These indoor multipath nulls emerge frequently in enclosed environments with metal surfaces, concrete walls, or moving equipment. The physical result is a dramatic drop in received signal power over a very short distance.
Physical Cause
Multipath propagation describes how signals bounce off obstacles to create multiple paths between transmitter and receiver. When these paths interfere destructively, indoor multipath nulls create localized zones where the composite carrier power drops below the receiver threshold. These drops can exceed thirty decibels in highly reflective environments.
Physical positioning of the transceiver by a few centimeters can move the antenna out of the silent zone.
System Impact
Packet losses rise sharply when an IoT node sits within these areas of destructive interference. If stationary equipment suffers from indoor multipath nulls, the wireless link can fail entirely despite being close to the gateway. This causes intermittent connection failures.
Mitigation Method
Antenna diversity provides a solution by placing two separate receive elements a fraction of a wavelength apart. Because indoor multipath nulls are highly localized, one antenna usually remains outside the null while the other is affected. Circuitry automatically selects the stronger signal to maintain a continuous data stream.
Engineers also use frequency hopping to shift the carrier wavelength and avoid persistent constructive or destructive nodes.