Meaning
Electrical test connection instruments designed with separate current and voltage paths measure extremely low resistances by eliminating lead resistance. Test technicians use a Kelvin clamp to connect a four-wire milliohmmeter to a component under test. This connection technique avoids errors introduced by contact resistance.
The measurement is highly accurate down to microohm levels.
Contact Isolation
Jaw assemblies are constructed with two electrically isolated halves that meet only at the point of contact on the test lead. In a Kelvin clamp, one jaw half sources the excitation current while the other half senses the voltage drop across the component. This separation ensures that no current flows through the measurement leads.
The voltage sensor measures only the potential drop across the test specimen.
Measurement Integrity
Lead wire resistance becomes insignificant because the high input impedance of the voltmeter prevents current flow in the sensing circuit. When using a Kelvin clamp, the user gets direct readings of the load resistance without needing to subtract the lead resistance. This feature simplifies test procedures in production environments.
It is useful for testing battery terminals and high-current busbars.
Mechanical Design
Robust physical spring mechanisms maintain consistent contact pressure on the terminal pins of the device under test. Standard Kelvin clamp assemblies are built to withstand thousands of open and close cycles in automated test environments. The copper contact surfaces are often gold-plated to prevent oxidation and ensure stable electrical contact.
Heavy-duty versions incorporate shielded cables to reduce electromagnetic noise pickup during high-power testing. Regular inspection of the jaw insulation is necessary to prevent short circuits that would bypass the four-wire measurement path.