Meaning
Integration component used to bridge a circuit board trace to an external connector or antenna. Designers use a microstrip pigtail when the antenna cannot be mounted directly onto the primary printed circuit board. The pigtail maintains the signal path across the gap between components.
Impedance Transition
Maintaining a constant fifty ohms is the primary challenge when moving a signal through a cable. A microstrip pigtail must match the impedance of the board traces to prevent signal reflections. Tapered transitions at the solder point help minimize the impact of the physical junction.
Physical Routing
Flexibility allows the wire to curve around internal batteries or structural ribs inside a device housing. Because the microstrip pigtail is often thin, it can be routed through narrow channels that a standard coaxial cable would not fit. This allows for more creative industrial designs without sacrificing wireless performance.
Signal Degradation
Loss increases with the length of the cable and the frequency of the transmission. Every centimeter of a microstrip pigtail adds a measurable amount of attenuation to the link budget. Engineers must choose the shortest possible path to ensure the device meets its sensitivity and output power requirements.
High frequency signals are particularly susceptible to the dielectric losses found in the flexible insulation of these cables.