Meaning
Regulatory directives issued by China’s Ministry of Industry and Information Technology establish spectrum utilization rules, technical specifications, and laboratory testing mandates for radio transmission equipment operating within mainland jurisdiction. The regulation governs frequency allocation boundaries, spurious emission thresholds, and hardware certification pathways for wireless devices manufactured, imported, or commercialized domestically. Its mandate stops at national territorial borders and excludes equipment manufactured exclusively for export markets.
Technical Limits
Wireless connectivity modules operating in common frequency bands such as two-point-four gigahertz and five gigahertz must adhere to strict limits regarding equivalent isotropic radiated power, out-of-band emissions, and carrier frequency tolerance. MIIT Notice 129 establishes narrow spectral emission masks designed to prevent commercial short-range radios from interfering with primary radiolocation, satellite, and mobile communications networks. The directive restricts operational channel selections and limits maximum radio frequency power outputs across specific sub-bands.
Certification Sequence
Hardware manufacturers must complete conformity assessments at accredited mainland testing laboratories to secure formal State Radio Regulatory Commission radio type approval. Test setups evaluate modular and host-integrated devices for conducted emissions, radiated harmonics, and spectral power density using specific test fixtures. The resulting laboratory test report forms the documentation basis required to obtain the mandatory radio transmission equipment type approval code.
Commercial products cannot undergo customs clearance or domestic distribution without this valid certification mark.
Modular Boundary
System designers integrate pre-certified radio frequency modules to bypass complete re-testing of core transceivers, yet host integration must remain within strict regulatory constraints. Alterations to antenna gain figures, changes in transmission firmware parameters, or mechanical enclosures that alter radiated emission characteristics void existing module approvals under the directive. Re-testing of host platforms becomes mandatory if trace antenna implementations deviate from the reference layout designs submitted in original module filings.
System qualification must continuously align with the technical criteria mandated by MIIT Notice 129 across every hardware revision.