Meaning
The rapid release of radio frequency energy by a narrow-band internet of things transmitter during packet upload represents a concentrated period of power consumption and signal output. Managing an NB-IoT transmission burst requires a precise understanding of how the transmitter interacts with the power supply of the device. This event features high peak currents that can last for several milliseconds as the modem transmits data over narrow frequency subcarriers.
The analysis covers the duration, frequency, and amplitude of the radio signal during active transmission, ending where the transmitter returns to a listening or sleep state.
Physical Characteristic
Radio signals are focused into narrow channels to maximize range and penetration through walls. During an NB-IoT transmission burst, the modem uses single-tone transmissions to achieve higher power spectral density. This focusing of power allows the device to communicate from deep underground locations or remote areas.
The trade-off is that these bursts can generate significant electromagnetic interference for nearby analog sensors.
Power Challenge
Battery systems must withstand the rapid drain caused by these sudden power spikes. A standard lithium thionyl chloride battery can experience a severe voltage drop when forced to deliver the high currents demanded by the transmitter. If the voltage drops below the minimum operating threshold of the microcontroller, the device will reset.
To prevent this, hardware designers place large supercapacitors in parallel with the battery to supply the peak current during the burst.
Hardware Design
Capacitance calculations are used to select components that can buffer the necessary charge. The supercapacitor must hold enough energy to support the modem for the duration of the transmission without falling below the minimum operational voltage. Hardware testing with dummy loads simulates these bursts to verify that the power supply remains stable under worst-case network conditions.