Meaning
Microscopic escape pathways formed by escaping gas during the thermal curing of adhesives or solder reflow can weaken the structural integrity of electronic assemblies. These outgassing channels create voids that allow moisture and contaminants to enter the board layers. The resulting structural instability can cause premature electrical failures in high-reliability applications.
Formation Mechanism
Volatile organic compounds present in solder pastes and laminates vaporize rapidly when exposed to high temperatures in the reflow oven. If the heating rate is too high, the vapor expands quickly and forces its way through the molten metal. This rapid escape creates open pathways.
Solder Joint Integrity
Presence of these outgassing channels reduces the cross-sectional area of solder joints, which lowers their mechanical strength. Under thermal cycling or mechanical shock, these compromised joints are prone to crack propagation. This issue is particularly damaging for heavy components.
Manufacturing Control
Adjusting the thermal ramp rates in the preheating zone allows the solvents to evaporate gradually before the solder reaches its liquid state. Minimizing the occurrence of outgassing channels requires selecting low-voiding solder pastes and ensuring that the printed circuit board is dry before the reflow process begins. Placing boards in a baking oven before assembly represents a reliable way to eliminate trapped moisture.
Furthermore, stencil design adjustments, such as using micro-apertures or segmented pads, can reduce paste volume and optimize escape paths for the volatile chemicals.