Meaning
Mathematical process calculates the total timing instability of a clock signal by summing the phase noise over a specific frequency range. High speed digital interfaces and radio frequency synthesizers use phase jitter integration to quantify the timing error in the time domain. By converting spectral density measurements into a single root mean square value, engineers can determine if a clock is stable enough for high performance data conversion.
This calculation typically covers an offset range from 12 kHz to 20 MHz for many telecommunications standards.
Bandwidth Selection
The choice of the lower and upper frequency limits for phase jitter integration depends on the sensitivity of the downstream components. A clock used for a high speed serializer may require a different integration window than one used for a precision local oscillator.
Signal Integrity
Excessive jitter causes errors in the sampling process of analog to digital converters, leading to a higher noise floor. In digital systems, it reduces the timing margin available for data recovery, increasing the bit error rate.
Filter Influence
Digital phase-locked loops can filter out some of the low frequency noise before the phase jitter integration occurs. Understanding the loop bandwidth of the receiver is necessary to accurately predict the impact of the clock noise on the final system performance.