Meaning
Electromagnetic energy escapes from an electronic device through its enclosure or cabling at frequencies other than the intended operating channel. Escaping signals often originate from harmonic distortion or switching noise in power supplies. Measurement of radiated spurious emission is a core part of electromagnetic compatibility testing to ensure a device does not interfere with other licensed radio services.
Compliance Boundary
Limits are set by international bodies like the FCC or ETSI to protect the radio spectrum. For a wireless module, any radiated spurious emission must fall below specified power levels, usually measured in decibel milliwatts. Testing occurs in anechoic chambers to block external signals.
The device is rotated to find the direction of maximum leakage.
Mitigation Strategy
Improving the shielding of the enclosure and adding ferrite beads to external cables reduces the escape of unwanted energy. A radiated spurious emission is often traced back to a poor ground connection or a trace that acts as an unintentional antenna. Redesigning the printed circuit board layout to keep high speed signals away from the edges can solve these issues.
Multi layer boards with dedicated ground planes provide a return path that minimizes radiation.
System Integration
Combining multiple pre certified modules into a single product can create new paths for noise. Final assembly testing confirms that the integration did not create a new radiated spurious emission.