Meaning
Short-term variations in the output period of a real-time clock signal affect the timing precision of embedded controllers during low-power sleep cycles. This instability, known as rtc jitter, represents the cycle-to-cycle deviation of the reference clock from its nominal frequency. It originates from internal thermal noise, power supply fluctuations or capacitive mismatch on the crystal oscillator lines.
Measurement Method
Phase noise measurements and period histograms recorded by high-frequency digital oscilloscopes quantify the extent of the timing variation. The measured value of rtc jitter determines the safety margin required for wake-up timers in low-power systems. In high-precision wireless devices, excessive cycle deviation can lead to synchronization failures with external base stations.
System Impact
Network communication protocols that rely on tight synchronization schedules suffer when timing instability increases. If the real-time clock fluctuates beyond the protocol’s guard band, the device may miss its scheduled receive window. This failure forces the transceiver to remain active for longer periods to reacquire the network signal, causing increased power consumption.
Hardware Mitigation
Printed circuit board layout practices reduce clock signal noise by shielding the crystal traces with ground guard rings. Choosing crystals with low equivalent series resistance minimizes the physical influence of external electrical noise.