Meaning
Alloy leaching dynamics describe the dissolution of printed circuit board surface finishes into molten tin-silver-copper solder during assembly. Process engineers monitor SAC305 solder pickup to prevent excess gold or copper accumulation from degrading solder joint mechanical reliability. The process occurs rapidly during reflow cycles when liquid solder contacts nickel-gold or direct copper land patterns.
Mathematical models of this leaching process cease to hold once the solder bath fully solidifies below the eutectic temperature.
Intermetallic Growth
Dissolved copper and gold form brittle intermetallic compound layers at the solder pad boundary. Excess gold concentrations above three percent by weight precipitate gold-tin compounds within the bulk solder matrix. These crystalline structures act as stress concentration points during mechanical shock tests.
Solder Bath Degradation
Wave soldering equipment experiences continuous metal accumulation as production boards pass through molten solder pots. Increasing copper content raises the liquidus temperature of the alloy, which leads to incomplete wetting and bridge formation across fine-pitch component pins. Foundry operators sample the solder bath periodically to confirm elemental composition limits before wave soldering defect rates rise.
When copper contamination exceeds industry thresholds, operators must dump or re-balance the alloy reservoir.
Joint Embrittlement
Solder joints with high intermetallic concentrations exhibit low resistance to thermal fatigue and shock. Cracks propagate along intermetallic boundaries during drop testing, causing open circuits in field deployments.