Meaning
Continuous wave carrier generation without dynamic data modulation forms an essential RF test mode for transmitter power calibration and spectral purity evaluation. Applying single-tone modulation allows test engineers to measure carrier power and frequency offset without interference from complex digital modulation schemes. The test configuration establishes a constant amplitude and frequency reference for physical layer validation.
Spectral Measurement
RF power amplifiers exhibit non-linear distortion when driven near compression points. Injecting a unmodulated carrier tone allows precise measurement of intermodulation products and phase noise using spectrum analyzers. Utilizing single-tone modulation simplifies compliance testing during regulatory RF exposure and spurious emission assessments.
Test software commands the radio chipset to output fixed CW mode across designated channel frequencies to verify power control loop linearity. Design validation teams use single-tone tests to verify matching network impedance across operating temperature extremes.
Calibration State
Single-tone operation enables fast factory calibration of transmitter output power levels. Unmodulated signals simplify power meter power tracking.
Verification Sign-Off
Regulatory test reports document conducted output power and occupied bandwidth measurements recorded in continuous wave mode. Production automated test equipment measures output carrier power accuracy against target calibration tables before device flashing. Verification protocols record power consumption and thermal dissipation during continuous single-tone transmission.