Meaning
A mathematical methodology combines the localized energy absorption profiles of multiple co-located transmitters to evaluate aggregate radiation exposure. This analytical approach, known as spatial SAR superposition, is used during the regulatory approval process for devices that transmit on cellular and wireless local area networks simultaneously. It determines if the combined electromagnetic field exceeds the safe limits established by regulatory bodies.
The application of this method is confined to devices where the antennas are close enough to have overlapping exposure volumes.
Evaluation Protocol
Calculating the combined exposure requires the acquisition of three-dimensional radiation grids for each active antenna. Instead of measuring all combinations of simultaneous transmission physically, spatial SAR superposition allows laboratories to sum the individual SAR distributions mathematically. This is done by aligning the coordinate systems of the different antennas and summing the values at each grid point.
This technique reduces the total time required for device certification while maintaining a high level of safety.
Power Control
Real-time mitigation techniques utilize dynamic power budgeting to prevent the aggregate absorption from exceeding safety thresholds. If the spatial SAR superposition calculations show a potential exceedance, the system firmware must implement a dynamic power management scheme. This scheme limits the transmit power of one radio when the other is active in a close-proximity scenario.
This approach keeps the total exposure safe without requiring a complete redesign of the internal antenna placement.
Laboratory Test
Accurate physical modeling in a tissue-simulating liquid is necessary to provide the baseline data for numerical calculations. A robotic probe scans the liquid-filled phantom while each antenna transmits individually to generate the high-resolution files needed for spatial SAR superposition. These scans capture the exact shape of the energy deposition in the simulated tissue.
Engineers then process these files using approved software to generate the combined exposure plots for the regulatory filing. This procedure is crucial for modern multi-radio devices such as smart tablets and mobile phones which pack multiple high-power transmitters into a very thin enclosure.