Meaning
Modulation parameters in long range radio communication determine the ratio between the symbol rate and the chip rate. Choosing spreading factor 10 results in 1024 chirps per symbol, which markedly increases the sensitivity of the receiver. This setting allows signals to be recovered even when the power level is below the noise floor.
Link Budget
Radio links benefit from a higher processing gain when using more chirps to represent a single piece of information. Because spreading factor 10 increases the time a symbol spends in the air, the receiver has more opportunities to integrate the signal energy. This capability extends the range of a gateway to several kilometers in urban environments.
It provides a reliable connection for sensors buried in ground or placed inside dense structures.
Signal Duration
Low power wide area networks must manage the airtime of every device to comply with local regulations and conserve battery life. A transmission using spreading factor 10 takes four times longer than one using spreading factor 8 for the same payload. This increased duration consumes more energy from the internal battery of the device.
Manufacturers often use this setting only when a sensor is at the very edge of the network range.
Network Density
Large scale deployments of smart meters or environmental sensors require careful frequency planning. When many devices use spreading factor 10, the likelihood of packet collisions increases because each transmission occupies the channel for a longer period. Gateways can often receive multiple signals simultaneously if they use different spreading factors.
Managing this distribution is necessary for maintaining high throughput in a crowded spectrum.