Meaning
Analytical mathematical models relating substrate curvature shifts to mechanical stress inside thin film coatings allow non-destructive evaluation of thin-film stress during semiconductor wafer processing. The stoney equation calculates film stress from changes in wafer radius of curvature, substrate thickness, substrate Young modulus, and Poisson ratio. In semiconductor manufacturing and module substrate fabrication, this mathematical expression converts optical or capacitive wafer bow measurements into quantitative stress values for deposited metallic or dielectric layers.
The model assumes film thickness remains far smaller than substrate thickness and stress distribution across the wafer surface remains uniform.
Mathematical Formulation
Stress calculation depends directly on mechanical properties of the supporting substrate material and measured physical deflection changes. The stoney equation expresses thin film stress as equal to substrate Young modulus divided by six times one minus Poisson ratio, multiplied by substrate thickness squared divided by film thickness, multiplied by the change in substrate curvature. This relationship requires accurate knowledge of substrate elastic constants and precise measurement of substrate thickness before and after film deposition.
Modifications to the base formula account for anisotropic elastic behavior in single-crystal silicon wafers.
Validity Boundary
Theoretical assumptions underlying the formulation restrict its application to specific geometric and mechanical regimes. When film thickness exceeds several percent of total wafer thickness, non-linear deformation modes violate basic assumptions behind the stoney equation, causing inaccurate stress estimates. Large wafer deflections where out-of-plane displacement exceeds half the wafer thickness introduce spherical-to-cylindrical transition bifurcation.
Multi-layer film stacks require modified integral formulations to separate individual layer stress contributions from total measured curvature change.
Metrology Handover
Wafer inspection tools apply the stoney equation automatically to generate stress map reports across substrate surfaces during fab quality control steps.