Meaning
Refractory ceramic thin films act as diffusion buffers between copper interconnects and silicon or dielectric layers to prevent metal migration. The tantalum nitride barrier is deposited using physical vapor deposition to create a dense, chemically stable layer. Copper atoms are highly mobile and can migrate into the surrounding silicon, causing device failure.
This barrier effectively blocks that movement while maintaining a low-resistance electrical contact.
Diffusion Prevention
The amorphous or nanocrystalline structure of the film eliminates the grain boundaries that copper atoms usually follow. When a tantalum nitride barrier is present, the reliability of the integrated circuit is measurably improved. It prevents the formation of copper silicides.
The thickness of the layer is usually optimized to be as thin as possible to save space while remaining continuous. Because the atoms cannot penetrate the lattice, the integrity of the dielectric remains intact over thousands of thermal cycles. This layer is a necessity for sub-28nm fabrication where traditional barrier materials fail to provide sufficient coverage on the sidewalls of high-aspect vias.
Material Interface
Adhesion is a primary requirement for the films used in advanced metallization stacks. A tantalum nitride barrier provides a strong bond between the underlying dielectric and the subsequent copper seed layer. This prevents the metal lines from peeling during chemical mechanical polishing.
Sometimes a pure tantalum layer is added to the stack to further enhance the adhesion to the copper.
Deposition Method
Reactive sputtering in a nitrogen-rich environment is the standard way to form these coatings. The properties of the tantalum nitride barrier are tuned by adjusting the flow rate of nitrogen during the deposition process. Higher nitrogen content generally increases the electrical resistivity of the film.
Resistivity rises. Engineers must balance the barrier efficiency against the total resistance of the interconnect stack.