Meaning
Computational prediction of electromagnetic wave propagation utilizes numerical solvers to analyze the behavior of antennas before physical fabrication. Hardware teams rely on theoretical field simulation to estimate the coupling between closely spaced traces on a circuit board. The analysis is bounded by the accuracy of the material constants and the density of the calculation grid.
Mathematical Modeling
Finite element methods partition the complex geometry of the housing into thousands of small, calculated volumes. For each volume, the solver calculates the electric and magnetic vector fields using Maxwell’s equations. This step-by-step approach yields a detailed prediction of the radiation directions.
Engineering Verification
Comparing the computed plots with the physical measurements from an anechoic chamber validates the correctness of the virtual results. If the simulated gain matches the measured value within a tolerance of one decibel, the model is approved for further design iterations. Running a theoretical field simulation during the early concept phase avoids the high cost of spinning multiple prototype boards.
This approach helps developers optimize the placement of the shield cans to block unwanted radiated noise.
Resource Constraint
Processor limitation determines the speed and resolution of the high-frequency structural simulations. Running three-dimensional solvers requires specialized computer workstations equipped with large RAM capacities.