Meaning
Protective intervals in Time-Slotted Channel Hopping networks prevent data loss by accounting for the temporal drift between synchronized nodes. The tsch guard time is a period at the beginning of each timeslot where the receiver remains active to wait for a potential transmission. It ensures that even if the clocks of two devices have diverged slightly, the receiver is ready before the sender begins the preamble.
Synchronization Error
Clock crystals in low-cost hardware exhibit variations in frequency due to aging and temperature shifts. If the tsch guard time is too short, the receiver might miss the start of a packet, leading to expensive retransmissions.
Duty Cycle
Energy consumption in industrial wireless sensor networks is directly influenced by the duration of the radio listening window. A larger tsch guard time increases the reliability of the link but also forces the radio to stay powered for longer periods without receiving data. Engineers calculate the optimal value based on the required synchronization interval and the known precision of the local oscillators.
For a network that synchronizes every 30 seconds, a guard time of a few hundred microseconds is often sufficient to maintain the connection.
Latency Impact
Total frame length increases when these buffers are expanded to accommodate higher drift. This change slightly reduces the effective bandwidth available for the application layer.