Meaning
Transceiver characterization requires the transmission of a pure, single-frequency radio signal to analyze transmitter performance without modulation effects. The execution of unmodulated carrier testing provides a clear view of the transmitter’s center frequency and output power. This baseline measurement allows engineers to isolate hardware issues from software-related modulation problems.
Frequency Analysis
Spectrum analyzers measure the frequency and amplitude of the continuous wave output to detect drift or power inaccuracy. During unmodulated carrier testing, the signal must appear as a sharp peak with minimal sideband noise. This test configuration makes it easy to measure the reference frequency offset under various temperature conditions.
It provides the reference data needed to calibrate the local oscillator.
Spurious Detection
Unwanted spurious signals and harmonics are more easily identified when there is no modulation spreading the transmit energy. Engineers use unmodulated carrier testing to search the spectrum for out-of-band emissions caused by amplifier non-linearity or mixer leakage. If these emissions exceed the allowed thresholds, shield adjustments or changes to the output filters must be implemented.
This step prevents the transmitter from interfering with other wireless services.
Power Calibration
Verification of the transmitter output power stages requires a stable, unmodulated signal to calibrate the transceiver. Test software sets the output to specific power levels and records the corresponding digital-to-analog converter codes. This procedure ensures the device maintains its target output power.