Meaning
Material deformation that combines time dependent flow with permanent structural change. Viscoplastic creep occurs in metals or polymers when they are subjected to constant stress at elevated temperatures over long periods. This phenomenon is a primary failure mechanism for solder joints.
It results in a gradual stretching of the material until a fracture develops.
Failure Mechanism
Atomic rearrangement within the crystal lattice happens as a response to the applied force. In lead free solder, viscoplastic creep is accelerated by the heat generated during device operation. As the solder joint warms up, the metal atoms gain enough energy to slide past one another, causing the joint to slowly change shape.
This movement eventually leads to the formation of microvoids and cracks at the interface between the component lead and the circuit board pad. If the creep rate is not managed through proper alloy selection, the electrical connection will eventually open. Designers use constitutive models to predict the lifespan of these joints under the specific thermal profile of the product.
Stress Variable
Load magnitude and temperature are the two factors that dictate the rate of deformation. Higher temperatures lower the stress level required to initiate the flow. This relationship is non linear.
A small increase in heat leads to much faster failure. This factor determines how quickly viscoplastic creep progresses in the joint.
Design Mitigation
Engineering solutions focus on reducing the mechanical strain on sensitive connections. One common approach is the use of underfill, a specialized epoxy that bonds the component body to the board. This reduces the force applied to any single solder ball, slowing the progression of viscoplastic creep.
Another method involves selecting materials with matched coefficients of thermal expansion. Testing the assembly in a thermal shock chamber allows engineers to verify that the viscoplastic creep resistance of the chosen solder alloy meets the ten year reliability target.