Meaning
Measurement of RF energy absorption averaged over ten grams of tissue in the hands, wrists, feet, or ankles. Safety standards for mobile devices require that 10-g extremity sar remains below specific thresholds during operation. Compliance ensures that localized heating in these outer regions does not exceed biological safety limits defined by regulatory bodies.
Averaging Volume
The calculation method utilizes a contiguous mass of tissue shaped as a cube to determine the peak average. This 10-g extremity sar value differs from head or body measurements which typically use a smaller one gram average in some jurisdictions. Regulatory filings must demonstrate that the device stays within the four watts per kilogram limit for these specific body parts.
Testing Geometry
Positioning for this metric involves placing the radiating element of a device in direct contact with a flat phantom. Precise placement ensures that the 10-g extremity sar reflects the highest possible energy transfer during actual use. Robotic arms move sensors through a liquid medium to map the internal field distribution.
Thermal Dissipation
Dense antenna arrays in wearables often produce higher concentrations of energy in small areas. While 10-g extremity sar allows for higher limits than trunk SAR, the proximity to skin necessitates careful material selection to manage conductive heat. Manufacturers use shielding and power back-off algorithms to maintain levels below the maximum allowed by the Federal Communications Commission.