Meaning
Insulating layers situated above the transistor level in an integrated circuit provide the necessary electrical isolation between metal interconnects to prevent current leakage. The back end dielectric stack forms the structural environment for the wiring that connects individual cells into functional blocks. It prevents leakage between closely spaced traces while defining the parasitic capacitance of the signal paths.
Thermal Resistance
Dielectric constants determine the speed of signal propagation through the metal layers. Lower values for the back end dielectric stack reduce the delay associated with charging and discharging the interconnect lines. Reliability depends on the adhesion between these layers during thermal cycling.
Stress Distribution
Mechanical forces arise from the mismatch in thermal expansion coefficients between the metal and the surrounding insulators. A robust back end dielectric stack withstands the pressure applied during the bonding process where the die meets the package substrate. Delamination occurs if the internal tension exceeds the strength of the interfaces.
Cracks propagate through the layers when the assembly is subjected to rapid temperature changes. External pressure tests confirm the physical integrity of the layers under load.
Planarization Goal
Surface uniformity is achieved through chemical mechanical polishing at each stage of the build. Each level of the back end dielectric stack must be perfectly flat to allow accurate photolithography for the subsequent layer. Roughness in the back end dielectric stack leads to focus errors that ruin the fine features of the wiring.