Meaning
Structural yielding alters plated through-hole wall geometry during the mechanical insertion of press-fit pins into circuit boards. Excessive strain causes localized barrel copper deformation that displaces conductive metal into surrounding dielectric laminate. Micro-cracking along inner wall surfaces compromises electrical continuity between inner signal layers.
Precise control of pin compliance limits substrate displacement during automated assembly.
Strain Mechanism
Compliant pin tips exert radial force against copper plating during installation into board vias. Interference fits force ductile copper to conform to pin contours while absorbing insertion energy. High pin hardness or oversized beam profiles increase wall displacement beyond elastic strain limits.
Substrate glass weave density influences circumferential stress distribution around the hole.
Measurement Method
Microsection analysis measures plating thickness changes under optical magnification. Cross-section micro-graphs reveal wall thinning and foil separation from inner conductive traces. Metallographic polishing exposes radial cracks caused by mechanical stress during press operations.
Automated image software calculates percentage copper displacement across multiple section planes.
Acceptance Limit
Quality specifications establish maximum allowable hole wall distortion to protect circuit reliability. IPC-A-610 standards cap allowable barrel wall thinning at twenty-five percent of nominal plated thickness. Excessive barrel copper deformation causes internal circuit traces to detach from hole walls, generating intermittent open circuits under thermal cycling.
Micro-voids formed during severe plastic yield collect moisture, inducing conductive anodic filament growth across isolated layers. Thermal stress testing validates that post-insertion board structures retain mechanical integrity without inner-layer separation. Assemblies exceeding plastic deformation limits face immediate process shutdown.