Meaning
Tensile stress stored in a bolt during initial tightening provides the necessary friction to hold mechanical assemblies together. Tensile stress loss known as bolt clamp load relaxation occurs when the plastic or metal parts under the bolt head yield or creep, causing the fastener to lose its grip. Bolt clamp load relaxation is a primary cause of failure in power electronics modules where high torque is required for thermal contact.
Material Settlement
Microscopic peaks on the surfaces of the clamped parts flatten out under high pressure. Initial settlement of the joint happens shortly after assembly as the surfaces find a stable resting state. Using hardened washers or smoother surface finishes reduces the magnitude of this early loss.
Thermal Fatigue
Power cycles generate heat that causes the bolt and the clamped materials to expand at different rates. Because metals often expand more than the resins used in circuit boards, the increased pressure during hot states can exceed the compressive yield strength of the laminate. Repeated cycling results in permanent deformation of the board material, leading to considerable bolt clamp load relaxation once the system returns to room temperature.
Loss of force degrades the thermal interface between the component and the heat sink.
Assembly Integrity
Maintenance of the design force is verified through ultrasonic measurement or re-torque testing after environmental exposure. A failure in bolt clamp load relaxation leads to increased electrical resistance at busbar connections or overheating of power MOSFETs.