Meaning
Internal conductive passages formed between inner layers of a printed circuit board remain completely encapsulated within dielectric material without extending to either outer surface. Implementing a buried microvia enables high-density routing across internal signal planes while preserving surface area on external layers for high-pin-count components. The structure connects two or more internal copper layers through laser ablation followed by electrolytic copper filling and lamination.
The boundary of this interconnect type excludes any channel that contacts outer foil surfaces or penetrates through the full board thickness.
Inner Registration
Precise layer alignment systems control hole placement relative to internal target pads during inner-layer processing. When manufacturing dense multilayer substrates, a buried microvia requires tight laser alignment tolerances to prevent breakout beyond the copper pad boundary. X-ray drill targets establish spatial coordinates across internal copper layers before drilling occurs.
Misalignment reduces effective annular ring width, which impairs current carrying capability and long-term thermal endurance.
Sequential Buildup
Sub-assemblies containing internal interconnects undergo multiple pressing and curing sequences during fabrication. The internal sub-laminate is drilled, plated, and etched before outer dielectric prepreg layers are laminated over the processed core. In sequential lamination workflows, the buried microvia cavity must be completely filled with electroplated copper or conductive resin to prevent air entrapment.
Voids left within un-filled cavities expand during reflow temperatures, causing internal delamination.
Failure Mode
Microsection analysis isolates structural defects caused by thermal expansion mismatches between dielectric resin and electroplated copper. Internal strain concentrated around a buried microvia leads to target pad separation during thermal cycling. Internal separation at the target pad interface leads to intermittent signal loss during operating life.
Quality assurance protocols specify daisy-chain resistance monitoring during reliability testing to detect early microcrack propagation.