Meaning
Plated connection holes that are completely enclosed within the inner layers of a multi-layer printed circuit board and do not touch either the top or bottom surface. These internal paths, known as buried vias, connect two or more inner signal layers to optimize routing in complex board designs. Because they are hidden from the surface, they leave the external layers entirely free for placing high-density components.
Layer Connectivity
Creating these channels requires drilling and plating the core or inner laminate layers before the outer sheets of prepreg and copper foil are added. The internal connections must align perfectly with the hidden copper pads to ensure electrical continuity across the integrated layers. If the alignment shifts during the secondary lamination cycle, open circuits can occur that cannot be repaired after the board is pressed.
Optical and x-ray inspection systems verify the internal alignment of the hidden pathways prior to final lamination.
Structural Reliability
Environmental stress testing helps confirm that the inner copper barrels of these connections can withstand thermal expansion without fracturing. Because they do not extend to the surface, they are shielded from direct external mechanical stresses. This placement reduces the likelihood of solder joint failures at the connection points during assembly.
Assembly Expense
The requirement for sequential lamination cycles and multiple drilling operations adds substantial cost to the fabrication process. Designers therefore limit buried vias to advanced, multi-layer high-density interconnect designs.