Meaning
A deliberate pre-discharge process used to remove the high resistance passivation layer that forms on lithium primary cells during long periods of storage. This resistive layer protects the cell from self-discharge but must be broken down to allow normal current delivery. For smart utility meters, a chemical depassivation routine is executed by the firmware before starting wireless communications to ensure the cell can supply the required startup current.
This process prevents the system voltage from dropping below the reset threshold during initialization.
Activation Phase
Initiating a controlled current draw for a specified duration breaks down the passive lithium chloride film. This load is typically applied using an internal resistor controlled by a microcontroller pin. This activation phase restores the low internal impedance of the battery.
Thermal Impact
Ambient temperature highly influences the rate at which the passivation layer degrades. Cold environments slow down the depassivation process, requiring longer discharge pulses to achieve the same reduction in resistance. This temperature dependency must be factored into the control software.
Firmware Implementation
Running this recovery routine occurs periodically or whenever the cell voltage drops below a preset limit under a minor load. Designing this automated routine prevents sudden resets when the main transmitter starts up. This proactive measure increases the reliability of remote telemetry stations.