Meaning
Surface finishing techniques utilizing chemical solutions can reduce the roughness of metal parts without the application of an external electrical current. Implementing chemical polishing on complex geometries ensures uniform material removal across all exposed areas, including internal channels.
Dissolution Control
Selective dissolution occurs because the elevated micro-projections on the rough surface dissolve faster than the recessed valleys. During the chemical polishing process, a viscous reaction product layer forms on the metal boundary. This boundary layer limits the diffusion of fresh acid to the depressions while allowing the peaks to be aggressively attacked.
The process requires precise temperature regulation to prevent localized pitting or runaway thermal reactions.
Acid Mixture
Formulation parameters dictate the balance between etching and brightening on the metal surface. Solutions used for the chemical polishing of titanium alloys typically contain hydrofluoric and nitric acids in controlled ratios. This combination prevents the absorption of hydrogen, which would otherwise lead to mechanical failure.
Surface Quality
Average roughness measurements demonstrate the level of flattening achieved after the immersion cycle. Treated parts exhibit a reflective, passive finish that improves corrosion resistance and reduces the risk of fatigue crack initiation. This treatment is often applied to medical implants and aerospace components to remove heat-affected zones.