Meaning
Destructive analysis provides a view of the internal structures and interfaces within a printed circuit board or a semiconductor package. Using cross-section microscopy allows a technician to observe the vertical alignment of traces and the quality of buried vias. The process involves mounting a sample in a resin block and grinding it down to a specific plane of interest.
This technique reveals details that non-destructive methods like X-ray often miss.
Sample Preparation
Polishing the encapsulated component requires a sequence of abrasive papers with decreasing grit sizes. During cross-section microscopy, the surface must be finished with a fine diamond or alumina slurry to remove any smearing of ductile metals. Etching chemicals are sometimes applied to the polished surface to highlight the grain boundaries of the solder or the copper.
Cleanliness is vital to ensure that no debris obscures the features under observation.
Interface Verification
Measurements of the intermetallic compound layer at a solder joint indicate the long-term reliability of the electrical connection. When performing cross-section microscopy, the thickness of this layer is assessed to ensure it falls within the nominal range for the chosen alloy. Excessive growth of these compounds suggests high thermal exposure, while insufficient growth points to a cold solder joint.
The alignment of stacked vias in high-density interconnect boards is also verified through this lateral view.
Defect Identification
Subsurface cracks in ceramic capacitors or delamination between resin layers become visible under high magnification. Data from cross-section microscopy identifies the root cause of failures that occur during thermal cycling or mechanical shock tests. Voids in the solder bulk or non-wetting at the pad interface appear as distinct gaps in the material continuity.
This visual evidence supports the qualification of new assembly processes.