Meaning
Metal enclosure formed through a sheet metal forming process to provide electromagnetic interference protection for sensitive board-level components. A deep drawn shield is manufactured by pulling a flat metal blank into a forming die using a mechanical punch. This method creates a solid five-sided box without the gaps found in folded or soldered frames.
It effectively blocks high-frequency radiation from escaping or entering the shielded area.
Manufacturing Process
Lubricated metal strips undergo multiple stages of drawing to reach the final depth without tearing the material. Since the deep drawn shield is one continuous piece, it offers superior structural integrity compared to multi-piece assemblies. Tin-plated cold rolled steel or nickel silver are common material choices due to their solderability and shielding effectiveness.
The process allows for the creation of complex rounded geometries that fit tightly around oddly shaped components.
Thermal Management
Heat dissipation is a secondary concern when enclosing high-power radio frequency modules. A deep drawn shield may include perforated sections or venting holes to allow airflow while maintaining electromagnetic isolation. Some designs incorporate thermal interface materials that bridge the gap between the chip and the metal ceiling of the shield.
This setup turns the shield into a heat spreader for the system.
Surface Mounting
Pick-and-place machines install these covers directly onto the printed circuit board during the reflow process. Because a deep drawn shield lacks seams, it provides a consistent ground contact along the entire perimeter. This uniform contact is vital for suppressing noise at gigahertz frequencies.
Reliability testing includes vibration and drop tests to ensure the shield remains attached to the solder mask.