Meaning
Sensitivity degradation in a receiver caused by internal or external electromagnetic interference represents a critical failure mode in wireless integration. Engineers observe desense when the noise floor of a radio rises, making it impossible to detect weak signals from a distant base station. This effect occurs even when the interfering source is not on the same frequency as the radio.
Causal Factors
Clock signals from high-speed processors or data lines often radiate noise that couples into the antenna path. This form of desense effectively blinds the receiver by masking the intended signal. Power supply switching and display drivers also contribute to the local electromagnetic environment.
Diagnostic Testing
Evaluation of the total isotropic sensitivity provides a quantitative measure of how much performance is lost. Comparing the conducted sensitivity of a module to its radiated sensitivity in a finished housing reveals the impact of desense on the system. If the difference is more than a few decibels, the integration requires further shielding.
Mitigation Strategy
Shielding cans and grounding gaskets provide physical barriers to prevent noise from reaching the antenna. Filtering of power lines and data traces prevents unwanted signals from traveling across the board. Careful frequency planning helps avoid harmonics that might land on the receiver’s operating band.
Successful mitigation ensures the device meets the performance requirements of cellular carriers. Performance is then verified in a shielded chamber.