Meaning
Hardware protection limit defining the specific memory ranges accessible to a peripheral controller. Enforcement of the direct memory access boundary ensures that a secondary bus master can only read from or write to authorized buffers. If a peripheral attempts to cross this line, the system controller denies the transaction.
This protection prevents a faulty radio module from overwriting critical processor instructions or kernel data structures.
Address Restriction
Logical constraint programmed into a memory protection unit or a dedicated hardware gate. When a peripheral initiates a transfer, the direct memory access boundary logic compares the target address against a whitelist of permitted locations. Any attempt to access an address outside this list results in a bus error.
This mechanism is configured during the boot process before the peripheral is allowed to start data transfers.
System Resilience
Capability of the hardware to maintain operation when one module fails or becomes corrupted. By enforcing a direct memory access boundary, the system ensures that a memory error is contained within the buffer assigned to that specific peripheral. This containment allows the firmware to detect the error and reset the failing module without losing the state of the entire application.
Configuration Protocol
Technical sequence required to establish the limits for a specific bus master. The firmware writes start and end addresses into control registers to set the direct memory access boundary for each active channel. These values must match the memory regions defined in the linker script to avoid false violations.
Once the registers are locked, the boundary cannot be changed without a system reset or a high-privilege instruction. This locking ensures that a compromised driver cannot widen its own access permissions during runtime.