Meaning
Predicting the long-term reliability of metal tracks in integrated circuits requires simulating the transport of atoms under the influence of electrical currents. Applying electromigration modeling allows designers to locate areas prone to void formation and estimate when a circuit will fail. This simulation considers both electron wind forces and thermal gradients across the metal network.
It helps prevent hardware failures in smart devices.
Numerical Simulation
Modern simulation engines solve partial differential equations that describe mass transport, temperature distribution, and mechanical stress. Within electromigration modeling, these equations calculate the atomic flux divergence at each node of the interconnect layout. This complex calculation identifies localized regions where atomic depletion or accumulation is likely.
Engineers use these plots to redesign the circuit layout before tape-out.
Design Integration
Integrating these predictive models into the design workflow ensures that every signal line complies with foundry limits. During this phase, electromigration modeling flags violations that require immediate routing adjustments.
Verification Method
Validating the accuracy of these models involves subjecting test chips to accelerated life testing at high temperatures and high currents. During this process, engineers apply electromigration modeling to the test structures to compare simulated times-to-failure with physical measurements. This comparison helps refine the material coefficients used by the electronic design automation tools.
Without this calibration, the simulations could over-dimension the power grids and increase the unit cost.