Meaning
Standardised technical specifications define European regulatory compliance for broadband radio equipment operating within the 60 GHz industrial, scientific, and medical frequency spectrum. Devices functioning between 57 GHz and 71 GHz adhere to etsi en 302 567 to establish legal conformity with radio equipment directives for high-speed local data transmission. The document sets limits for equivalent isotropically radiated power, transmitter unwanted emissions, receiver spurious responses, and spectrum-sharing parameters.
Its scope terminates outside the designated 60 GHz millimetre-wave boundaries and does not apply to fixed wideband point-to-point backhaul links regulated under dedicated fixed service standards.
Transmission Restrictions
Maximum radiated power levels enforce safe operational boundaries while ensuring coexistence among uncoordinated high-density deployments. Testing under etsi en 302 567 assesses integral antenna arrays, phased array steering dynamics, and channel bandwidths spanning nominal 2.16 GHz channels. The standard dictates stringent power spectral density caps to prevent transmission bursts from saturating adjacent millimetre-wave receivers.
Spurious emission floors remain strictly controlled both within local band edges and down to baseband processing clocks.
Channel Etiquette
Channel access rules require devices to implement contention techniques or clear channel assessment to share available spectrum without destructive degradation. Phased-array beamforming systems present specific evaluation challenges because antenna gain patterns alter dynamically during active link tracking. Test houses capture total radiated power using spherical spatial scanning arrays to assess beam compliance across multiple steering angles.
Integrated radio frequency integrated circuits must shut down power stages when no data remains queued, minimizing channel occupation time.
Integration Verification
Modular transceivers integrated into commercial host electronics require full chassis-level re-evaluation to verify that housing materials leave emission profiles within limits. Radomes, plastic bezels, and nearby metal brackets shift beam direction and cause sidelobe degradation that breaches absolute regulatory masks. Production test procedures measure radiated antenna patterns inside far-field millimetre-wave chambers rather than relying on conducted coaxial test points.
Final declaration of conformity documents confirm device compliance across all operational beam paths and specified thermal ranges.