Meaning
Radiated emission limits establish the maximum permissible field strength for any electronic device operating without a specific license. The fcc section 15.209 standard applies to the unintentional noise generated by clocks, processors, power supplies and oscillators. Baseline noise floors provide a target for electromagnetic compatibility in the absence of more specific band regulations.
Emission Ceiling
Baseline noise floors are measured at fixed distances of three or ten meters. When a product falls under this fcc section 15.209 rule, the manufacturer must ensure that the total radiated energy does not interfere with nearby receivers.
Testing Distance
Limit values change based on the frequency range being measured. Low-frequency emissions from a power converter under fcc section 15.209 are evaluated in microvolts per meter. Above one gigahertz, the testing transitions to average and peak detectors to account for the behavior of digital pulses.
These pulses require high-speed sampling.
Shielding Efficiency
Laboratory testing utilizes calibrated antennas in an anechoic chamber to capture the full radiation pattern. Because fcc section 15.209 covers such a broad range of electronics, the test setup must be repeatable and transparent. Engineers often find that cable routing and port termination influence the final measurement.
The orientation of the device during the scan is adjusted to find the position of maximum radiation, which often corresponds to the alignment of internal cables or PCB traces. Adding a ferrite core to a data cable is a common remedy when a device exceeds the allowed limits.