Meaning
Electrical consumption during non-volatile memory programming is measured by the total current and voltage required to change the state of floating-gate or charge-trap transistors. This physical quantity, known as flash write energy, determines the power budget required for data storage in remote telemetry devices. Energy consumption varies based on the size of the block being updated and the efficiency of the internal charge pump.
Electrical Profiling
Characterizing the power demand during storage operations requires high-resolution current monitoring on the supply rails of the microcontroller. The flash write energy consists of both the static current needed to run the internal state machine and the dynamic pulse needed to tunnel electrons through the oxide layer. Because these operations are brief but intense, the instantaneous power can spike significantly.
Engineers must measure these pulses to calculate the battery drain of the device during its planned operating life.
System Impact
Voltage drops can occur if the power supply cannot deliver the necessary current during programming cycles. This issue is especially critical in systems utilizing small coin-cell batteries with high internal resistance.
Optimization Strategy
Buffering writes in volatile memory reduces the frequency of programming cycles. This method decreases the cumulative flash write energy by consolidating multiple small updates into a single page write.