Meaning
Parasitic current paths that open when a complementary metal-oxide-semiconductor input is left unconnected allow both the upper and lower transistors of the input buffer to conduct simultaneously. This undesirable state, known as GPIO floating pin shoot-through, occurs because the high-impedance input sits at an intermediate voltage between the supply rails. It causes an unnecessary increase in system power consumption during low-power modes.
Physical Consequence
Internal input stages of modern microcontrollers require defined voltage levels to turn off one of the complementary transistors completely. When GPIO floating pin shoot-through occurs, the intermediate voltage leaves both the channel paths partially open, creating a resistive short between power and ground. This current path heats the die and can cause localized degradation.
System Prevention
Pull-up or pull-down resistors are enabled on all unused pins during the initialization phase of the firmware. By preventing GPIO floating pin shoot-through, this software practice ensures that every digital input remains at a stable logical state. This configuration protects the board against unintended power surges.
Quality Verification
Automated test software scans pin configurations during sleep-mode verification to confirm no input floats. Detecting GPIO floating pin shoot-through during design prevents later battery depletion. This verification is standard.