Meaning
Near-field diagnostic sensors of this type detect and measure the alternating magnetic field components of electromagnetic radiation near electronic circuits. An h-field probe typically consists of a small, shielded loop antenna that is sensitive to changing magnetic flux while remaining immune to electric fields. It is widely used during electromagnetic compatibility troubleshooting to locate high-frequency noise sources on printed circuit boards.
The probe outputs a voltage proportional to the strength of the localized magnetic field.
Sensor Mechanism
Faraday’s law of induction governs the operation of the loop sensor by generating a voltage in response to a time-varying magnetic field. When using the h-field probe, the physical size of the loop determines both the sensitivity and the spatial resolution of the measurement. A smaller loop provides higher spatial resolution for locating individual traces but offers lower signal sensitivity.
Diagnostic Application
Swiping the loop across the board surface allows engineers to map current paths and identify noise-coupling mechanisms.
Calibration Protocol
Characterization of the probe requires establishing a known magnetic field strength in a controlled environment. This is achieved using a TEM cell or a microstrip validation line where the field can be calculated analytically from the input power. The calibration factor relates the measured output voltage to the incident magnetic field strength across the frequency range of interest.
This ensures that the diagnostics yield quantitative measurements that can be compared to compliance standards or simulation models.