Meaning
Radiated electromagnetic energy generated at integer multiples of a transmitter’s fundamental frequency degrades adjacent radio frequency bands and breaches regulatory spurious thresholds. An unintended harmonic radiated field emerges when non-linear amplifier behavior or inadequate output filtering allows power to escape at double or triple the intended carrier frequency. The phenomenon extends from the active transmitter circuitry through host PCB traces and chassis apertures into surrounding free space.
Compliance standards limit the maximum permitted amplitude of these secondary emissions to protect co-located wireless receivers.
Generation Mechanism
Amplifier saturation and non-linear switching circuits generate integer multiples of the fundamental RF signal. As high power signals pass through active power amplifiers, harmonic radiated field components arise from distortion product generation inside the semiconductor die. Trace routing and host enclosure gaps can inadvertently form resonant structures that amplify specific harmonic frequencies.
Coupling between RF traces and adjacent power planes further increases unwanted radiation.
Suppression Technique
Low-pass filtering and shielding mitigate spurious emissions. Inserting a low-pass filter at the antenna port attenuates harmonic radiated field power before energy enters the radiating element.
Qualification Testing
Compliance testing measures spurious output across broad spectrum ranges inside specialized test chambers. Evaluation of a harmonic radiated field requires scanning up to the tenth harmonic of the highest operational frequency using calibrated horn antennas. Electromagnetic compatibility test suites record peak and average field strength readings to confirm compliance against international radiation standards.
Failure to attenuate these emissions requires circuit modifications or structural grounding adjustments.