Meaning
International safety standards define the lifecycle requirements for medical device software development to ensure patient and operator safety. The IEC 62304 standard governs the processes of planning, design, implementation, verification, and risk management of the embedded code. This framework categorizes software based on the severity of potential injury to the patient, from no injury to serious harm.
Device manufacturers must demonstrate compliance with these requirements to obtain regulatory clearance for their connected health systems.
Process Classification
Risk analysis determines the development path that the software team must follow. Under IEC 62304, software is divided into Class A, Class B, or Class C based on the potential consequence of a system failure. Class C represents the highest risk level where software failure could result in death or serious injury.
Each class mandates a progressively more rigorous set of documentation and code verification activities.
Verification Protocol
Software unit testing must be performed and documented for all high-risk code modules. The IEC 62304 standard requires that the test plan covers both normal operating conditions and anomalous inputs to prevent software lockups. Automated test suites run continuously during the development cycle to catch regressions.
These results are compiled into the software verification report for the technical file.
Regulatory Compliance
Certification bodies audit the development trace matrix to verify that every software requirement is tested. This audit confirms that the implementation of IEC 62304 meets regional regulatory expectations. The resulting compliance certificate is a mandatory component of the technical file.