Meaning
Non-linear distortion products in radio frequency amplifiers and mixers generate unwanted spurious signals close to active operational channels. Third-order intermodulation distortion, abbreviated as IMD3, represents the non-linear products occurring at frequencies equal to twice one tone minus the other tone when two closely spaced signals pass through a non-linear circuit. These distortion products scale with a three-to-one slope relative to fundamental input power increases.
Transceiver designers measure these products to assess receiver selectivity and transmitter spectral purity. The scope of IMD3 is limited to third-order non-linear terms and does not include harmonic distortion or higher-order intermodulation products.
Mathematical Derivation
Expansion of a polynomial transfer function demonstrates how cubic terms generate intermodulation frequencies. Evaluating IMD3 involves sweeping two equal-amplitude tones through the unit under test and measuring output power at the resulting sidebands.
Spectrum Overlap
Because third-order products sit directly adjacent to fundamental signals, filtering them without attenuating the carrier signal is physically impossible. Operating a power amplifier near saturation causes IMD3 sidebands to spill into adjacent radio channels and degrade signal-to-noise ratios.
System Linearity
Cascaded system analysis combines individual component third-order intercept points to predict overall receiver performance. Lowering input signal power reduces IMD3 products faster than the desired signal level drops. Linearity budgets dictate low-noise amplifier gain settings to prevent receiver saturation in high-density spectrum environments.