Meaning
Spurious radio frequency signals generated by non-linear interactions between multiple active carrier frequencies can distort wireless receiver sensitivity and breach regulatory spectral masks. Intermodulation emissions occur when co-located transmitters mix within non-linear elements such as power amplifiers and solid-state switches. The resulting product signals land at mathematical combinations of the original frequencies, creating unwanted energy across adjacent frequency bands.
These unwanted signals fall under strict limits set by international telecommunications standards to prevent interference with neighboring spectrum users.
Spectral Mix
Third-order and fifth-order frequency products present severe risks to receiver sensitivity due to their proximity to active operating bands. When evaluating intermodulation emissions, engineers calculate fundamental frequency products to predict potential in-band receiver desensitization. Dual-tone tests measure third-order intercept points under high input power conditions to quantify non-linear distortion levels.
Mitigating these mixing products requires high-isolation diplexers and linear power amplifier stages.
Hardware Shielding
Mechanical design features prevent external passive non-linearities from generating spurious signals near antenna feed lines. Controlling intermodulation emissions requires pristine surface plating and controlled fastener torque along the RF path.
Compliance Boundary
Regulatory limits restrict maximum radiated power levels for all third-party mixing products across licensed cellular bands. Unchecked intermodulation emissions prevent cellular modules from passing regulatory emission standards during certification testing.