Meaning
Analytical modeling of bolted assemblies evaluates how clamping loads are shared between the fastener and the surrounding flange. This procedure, known as joint stiffness calculation, determines the spring rates of both the bolt and the compressed members to predict joint behavior under external loads. Engineers use these values to prevent separation of the clamped interface when the product is subjected to tensile or shear stresses.
Stiffness Ratio
The calculation relies on representing the bolt as a tension spring and the clamped plates as a compression spring. While the bolt stiffness is straightforward to compute from its geometry, the stiffness of the clamped members is more complex because the compression area spreads outward from the bolt head. Engineers use the concept of a compression cone to estimate the volume of material that actively resists the clamping force.
This cone angle depends on the thickness of the joint plates and the elasticity of the casing material, making the analysis critical for multi-material assemblies.
Force Distribution
Determining the outcomes of the joint stiffness calculation dictates the proportion of the external working load that the bolt must carry. If the members are much stiffer than the bolt, the additional load on the bolt remains tiny, which reduces the risk of fatigue failure. When the joint is assembled from flexible plastic parts, however, the low stiffness of the plastic increases the load share of the bolt.
This behavior requires careful selection of the initial tightening torque to prevent the bolt from breaking under load.
Fatigue Prevention
Accurate knowledge of these spring rates prevents joint separation during operational vibration. If the plates separate under load, the joint loses its sealing ability and the bolt undergoes rapid fatigue. Gasket compression must be maintained at a constant level to avoid leakage.
This calculation acts as the primary tool to verify that the fastener can withstand dynamic operation without loss of clamping force.