Meaning
Precise resistance measurements on printed circuit boards or low-impedance components require separating the current delivery path from the voltage measurement circuit. Kelvin four wire sensing is an electrical measurement technique that eliminates the resistance of the test leads from the final calculation. This approach ensures that the voltmeter only measures the potential drop directly across the target component.
Circuit Configuration
The physical layout utilizes two independent pairs of wires connected directly to the DUT. One pair of wires carries the known excitation current through the component while the other pair connects to a high-impedance voltmeter to measure the voltage drop. By implementing Kelvin four wire sensing, the voltage-sensing loop draws almost zero current, which prevents lead resistance from causing measurement errors.
This configuration allows sub-milliohm shunt resistors to be measured with high precision on automated assembly lines.
Testing Utility
Production test fixtures use this method to inspect the quality of solder joints and power rails on populated boards. It isolates bad connections that would pass a standard two-wire probe test.
Component Integration
Incorporating these dedicated traces on a circuit board allows the system microcontroller to monitor battery current draw with high accuracy. This circuit helps manage power in portable devices by giving precise battery state information.