Meaning
National technical specifications established under the Korean Industrial Standards govern testing methods for short-range wireless devices operating within designated industrial, scientific and medical frequency allocations across the Republic of Korea. Providing standardized test architectures, ks x 3115 regulates low-power radio communication transceivers by setting exact procedural constraints for carrier frequency tolerance, occupied bandwidth, spurious emission thresholds and transmitter spectral power density. The standard ceases to govern cellular user equipment, terrestrial television transmitters and maritime radar systems governed by higher-category telecommunications statutes.
Spectrum Confinement
Transmit frequency stability ensures short-range wireless transceivers avoid encroaching upon adjacent licensed communications. Carrier frequency drift is monitored across fluctuating supply voltages and wide operational thermal ranges inside environmental test chambers. Occupied bandwidth measurements confirm that ninety-nine percent of total integrated mean radio-frequency output power remains strictly within legal channel boundaries.
Out-of-band spurious limits enforce steep roll-off requirements, dampening parasitic harmonics that would otherwise corrupt unrelated high-frequency receivers operating in neighboring bands.
Protocol Requirement
Medium access procedures mandate equitable spectrum consumption among unsynchronized short-range radio networks. Devices governed by ks x 3115 incorporate listen-before-talk channel assessment or pseudo-random frequency hopping sequences to minimize packet collision rates. Duty cycle ceilings constrain absolute transmit duration per hour, preventing high-rate transmissions from occupying shared carrier channels indefinitely.
Transmit power control mechanisms throttle active device gain to the minimal viable link budget margin, suppressing unneeded electromagnetic interference across shared commercial operating spaces.
Laboratory Certification
Conformance testing requires physical connection of device antenna terminals to calibrated spectrum analyzers and thermal power meters via non-radiating attenuation pads. Products lacking external antenna ports undergo equivalent isotropic radiated power evaluations inside fully anechoic chambers using calibrated receiving antennas. Measured data logs feed directly into the Korean National Radio Research Agency conformity assessment paperwork.
Production audits verify that shipping hardware revisions maintain the internal crystal oscillator tolerances and radio-frequency matching values declared in initial qualification dossiers.