Meaning
Modulation configurations using high spreading factors in long-range wide-area networks optimize receiver sensitivity at the expense of transmission speed. Selecting LoRaWAN SF10 increases the processing gain of the receiver by using more chirps per symbol. This setting is ideal for devices located deep inside buildings or far from the nearest gateway.
The trade-off is a significantly longer transmission duration.
Link Performance
Operating at higher spreading factors allows signals to be demodulated even when the received power falls below the thermal noise floor. Utilizing LoRaWAN SF10 provides a link margin improvement that helps overcome path loss in dense urban environments. This configuration allows communication over several kilometers under challenging conditions.
However, the increased transmission time makes the signal more vulnerable to interference from other devices on the same channel.
Power Budget
Long transmission times directly increase the energy consumed by the transmitter during each uplink cycle. When operating on LoRaWAN SF10, the battery life of a remote sensor is reduced compared to operation on lower spreading factors. Designing for this configuration requires high-capacity batteries or optimized update intervals to achieve multi-year lifespans.
Engineers must minimize the frequency of uplinks to prevent rapid battery depletion.
Network Capacity
Airtime limitations dictate how many devices can share the same channel without causing excessive collisions. Because LoRaWAN SF10 occupies the channel for a relatively long period, it reduces the overall capacity of the local gateway. Network managers use adaptive data rate algorithms to move devices to lower spreading factors whenever signal conditions improve.
This optimization frees up valuable channel capacity for distant nodes that truly require the higher spreading factor. Limiting the use of high spreading factors ensures that the entire network remains responsive and stable.