Meaning
Temporal misalignment happens between two high-speed signals traveling along parallel copper traces on a dielectric substrate. While signals should arrive simultaneously, microstrip line phase skew causes one signal to lag behind the other. This delay reduces the timing margin for data recovery and can lead to bit errors in high-bandwidth interfaces.
Velocity Variation
Signal speed depends on the local dielectric constant of the circuit board material. Even if the traces are the same physical length, microstrip line phase skew occurs if one trace runs over a glass bundle while the other runs over a resin-rich area. High-frequency designs often use spread-glass weaves to make the substrate more uniform.
Signal Timing
Differential signals rely on the crossover point to define the transition between logic states. Excessive microstrip line phase skew moves this crossover point and closes the signal eye, making it difficult for the receiver to distinguish between a zero and a one. Lengthening the shorter path with serpentine traces is a common correction method.
Design Tolerance
Maximum allowable timing gaps are specified in picoseconds for each interface standard. This limit ensures that the data eye remains open enough for the receiver to sample the signal without errors.