Meaning
Discontinuities in a printed circuit board reference layer occur when a copper plane is divided into separate voltage regions. A microstrip split plane forces return currents to take longer paths around the division, which increases the loop area and causes electromagnetic emissions. This configuration must be avoided for high-speed signal lines that require a continuous return path.
Impedance Discontinuity
Crossing a gap in the reference plane changes the characteristic impedance of the transmission line. When a signal trace runs over a microstrip split plane, the local impedance rises, causing signal reflections and degradation. This reflection increases jitter and reduces the eye opening in high-speed digital communications.
Electromagnetic Emission
Larger loop areas created by diverted return currents act as efficient loop antennas that radiate electromagnetic energy. When high-frequency traces cross a microstrip split plane, the board fails electromagnetic compatibility testing due to elevated radiated emissions. Designing continuous reference planes under high-speed traces is the primary method used to prevent this issue.
If a split plane must be crossed, designers must place stitching capacitors across the gap to provide a localized return path for the high-frequency currents.
Board Routing
Separating analog and digital ground regions prevents digital switching noise from corrupting sensitive analog circuitry. However, routing traces over a microstrip split plane defeats this isolation by coupling high-frequency noise into the adjacent plane. Engineers must use careful board stackup planning to ensure that all high-speed signals are routed exclusively over solid ground layers.